Termékek
-
Dynair REC Pro 75 High efficiency HRU
Construction
- The casing is made with double skin panels, with 25mm thick rockwool insulation with re reaction class A2S1d0; external panels are in prepainted steel, internal panels in galvanized steel
- Integrated by-pass system with actuator, for free-cooling operations
- Access to fans and lters sections is ensured by doors with hinges and locking devices; additional access is given to the lters thanks to lift-o panels
- The units are complete with an electronic control device for the setting of the ventilation and temperature, monitoring of the status of the lters, week programming, defrost management and anti-freeze device for the additional water coil module
Accessories
A wide range of accessories is available: consult the catalogue.
CATALOGUE
-
Dynair CC-JC Centrifugal induction fans – Car park ventilation
Construction
- Hub impeller and airfoil prof le blades made in aluminium. Balanced according to ISO 1940
- Housing in electrolytically galvanized steel sheet
- Protection guard on inlet side
- Fixing brackets in galvanized steel sheet for ceiling/ wall installation supplied pre-assembled
- Asynchronous three-phase double polarity motor 380-420V – 50 Hz suitable to work up to a maximum temperature of 40°C (service S1) and 300°C for 120 minutes in case of fire emergency (service S2). CE marked, IP55 protection, Class H. Suitable for continuous running (S1). Execution 5: Impeller directly coupled on the motor shaft.
CATALOGUE
-
Dynair JET FANS CC JD Axial impulse fans
Construction
- Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
- Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
- Protection guard on inlet side
- Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
- Silencers are fi tted at both ends with an especially designed smooth bell shape to improve air performance and reduce losses and sound level
- Housing in electrolytically galvanized steel sheet
- Hub impeller and airfoil profi le blades made in aluminium. Balanced according to ISO 1940. Variable pitch angle in still position
- Terminal box IP54, resistant to high temperature and supplied as standard.
MOTOR
Asynchronous three-phase motors 380-420V 50 Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H.
Execution 4 (with impeller directly coupled to motor with feet).CATALOGUE
-
Dynair DA Direct drive double inlet fans
Construction
- Volute in galvanized steel sheet
- Direct drive double inlet forward curved wheel
- Single-phase and three-phase motor (only 12/9 and 12/12), IP20, class F. Thermal protection in single-phase versions. Particularly suitable for speed regulation (using the suitable speed regulators shown in this catalogue)
Accessories
- Outlet flange
- Fixing feet
CATALOGUE
ACCESSORIES
-
Dynair Box-CA Active carbon filtering units
Construction
- Frame in extruded aluminium profi les and removable double skin panels in galvanized steel sheet
- Lining of the plenum with self-extinguishing techno-polymer material
- Double inlet centrifugal fan with forward curved blades, driven by trapezoidal belts and adjustable pulleys. Fan and motor supported by single base frame and isolated from the main structure by anti-vibration mounts and flexible joint on the outlet
- Filtering battery composed by wavy polyester pre-filter (class G3), pocket filter (class F7) and activated charcoal filter in cartridges
- Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F. Suitable for S1 service (continuous working at constant load)
Accessories
- Weatherproof cover
CATALOGUE
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair Box-T Belt driven double inlet box fans
Construction
- Frame in extruded aluminium profiles and removable panels in galvanized steel sheet
- Plenum lining of the with self-extinguishing techno-polymer material
- Double inlet centrifugal fan with forward curved blades, driven by trapezoidal belts and adjustable pulleys. Fan and motor supported by single base frame and isolated from the main structure by anti-vibration mounts and flexible joint on the outlet
- Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F. Suitable for S1 service (continuous working at constant load).
Accessories
- Weatherproof protection cover
- Support feet
- Outlet terminal with guard
- Setting shutter
- Setting shutter with filtering section (standard version with filter in polyester with efficiency 90.1%, class EU4).
CATALOGUE
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair S-CUBE KAT Backward curve centrifugal box fans – High temperature for industrial kitchens
Construction
- Aluminium frame with double skin sound absorbing insulated panels removable from the impeller side
- Motor external to the stream, B5 execution directly coupled to the impeller
- Sound absorbing and self-extinguishing material between the steel sheet layers of the panels
- Galvanized steel sheet backward curved impeller dynamically balanced according to ISO1940
- Punched mounting feet for an easy handling and fixing
- Asynchronous squirrel cage three-phase or single-phase motors according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, Class F Suitable to S1 service (continuous running with constant load)
Accessories
- Water-proof protection cover
- Anti-vibration supports
- Floor support feet
- Round spigot inlet cone
- Square to round outlet adaptor
- Flexible connector (on demand from model 35, yo be coupled with round spigot inlet cone or square to round outlet adaptor)
- Service switch IP67
- Grease collector tray
CATALOGUE
ACCESSORIES
-
Dynair S-Cube Backward curved centrifugal box fans
Construction
- Frame in extruded aluminium profiles and removable double skin panels in galvanized steel sheet; all this brings to an excellent aesthetic impact
- Acoustic lining of the panels in self-extinguishing techno-polymer
- Backward curved impeller directly coupled to the motor
- B3 Motor fitted using suitable reinforced support seat
- Support brackets with holes suitable for lifting and easy installation
- Motor equipment:
- Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F
- All suitable to S1 service (continuous working at constant load)
Accessories
- Weatherproof cover
- Rainproof discharge outlet with guard
- Anti-vibration supports
- Floor support feet
- Square/Round outlet connector
CATALOGUE
ACCESSORIES
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair Box-D Direct drive double inlet box fans
Construction
- Frame in extruded aluminium profile; removable panels in galvanized steel sheet; all this brings to an excellent aesthetic impact. Weatherproof cover in galvanized steel sheet
- The blower is fitted using suitable support feet and is completely isolated from the casing by anti-vibration mounts and gaskets
- Acoustic lining in self-extinguishing technopolymer
- Double inlet blower, forward curved, with direct drive built-in asynchronous motor, singlephase or three-phase, IP20, class F, particularly suitable for speed regulation (using the suitable speed regulators shown in this catalogue)
- Weatherproof upper cover with suitable holes for lifting hooks
Accessories
- Rainproof outlet with guard
- Support feet
- Filtering section (standard version with filter in polyester with efficiency 90.1%, class EU4).
CATALOGUE
ACCESSORIES
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair Mini-Box Slim-line acoustic cabinet fans
Construction
• Casing in galvanized steel sheet, lined with acoustic insulation (thickness 10 mm).
• Single-phase electric motor, IP44, class F, with thermal protection, suitable for speed control.
• Fitting bracket
• Backward curved impeller with high effi ciency and low noise level.
• Outer terminal box IP55.Accessories
• Electric duct heaters BE.
• Backdraught shutters.
• Duct clamps.
• Protection guardsCATALOGUE
ACCESSORIES
-
Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air
Construction
- Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
- Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
- Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
- For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, , designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard
- Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)
Accessories
- Condensation drain hole (TS)
- Inspection door (PI)
- Inlet counter-flange (CFA)
- Outlet counter-flange (CFP)
- Inlet protection guard (RA)
- Outlet protection guard (RP)
- Inlet flexible connector (GA)
- Outlet flexible connector (GP)
- Inlet vane control
- Outlet setting shutter
- Anti-vibration mounts
CATALOGUE
-
Dynair PV-L/INOX Backward curved blade centrifugal fans for dusty air
Construction
- Volute casing in steel sheet , protected against atmospheric agents by epoxy paint
- Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
- Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted
- For high rotational speed, versions in class 3 are foreseen
- For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, , designed for easy lubrication
- Pulleys, belts and motor support. Belt protection guard
- Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)
Accessories
- Condensation drain hole (TS)
- Inspection door (PI)
- Inlet counter-flange (CFA)
- Outlet counter-flange (CFP)
- Inlet protection guard (RA)
- Outlet protection guard (RP)
- Inlet flexible connector (GA)
- Outlet flexible connector (GP)
- Inlet vane control
- Outlet setting shutter
- Anti-vibration mounts
CATALOGUE
-
Dynair PS-L/INOX Backward curved blade centrifugal fans for dusty air
Construction
- Volute casing in steel sheet , protected against atmospheric agents by epoxy paint
- Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
- Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
- For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, , designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard
- Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)
Accessories
- Condensation drain hole (TS)
- Inspection door (PI)
- Inlet counter-flange (CFA)
- Outlet counter-flange (CFP)
- Inlet protection guard (RA)
- Outlet protection guard (RP)
- Inlet flexible connector (GA)
- Outlet flexible connector (GP)
- Inlet vane control
- Outlet setting shutter
- Anti-vibration mounts
CATALOGUE
-
Dynair PR-L/INOX Backward curved blade centrifugal fans for clean or slightly dusty air
Construction
- Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
- Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
- Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
- For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard
- Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load).
Accessories
- Condensation drain hole (TS)
- Inspection door (PI)
- Inlet counter-flange (CFA)
- Outlet counter-flange (CFP)
- Inlet protection guard (RA)
- Outlet protection guard (RP)
- Inlet flexible connector (GA)
- Outlet flexible connector (GP)
- Inlet vane control
- Outlet setting shutter
- Anti-vibration mounts
CATALOGUE
-
Dynair CCB Bifurcated ducted axial fans
Construction
- Stainless steel AISI 304 casing, with airtight motor housing, with fixing flanges manufactured according to ISO 13351
- High performance axial impeller with aerofoil profile blades and hub in diecast aluminium, balanced according ISO 1940. Variable pitch angle
- Execution 4 (with impeller directly coupled to motor with feet) and airflow from impeller to motorAsynchronous three-phase or single-phase motors according to international standards IEC 60034, IEC 60072, EMC 2014/34/UE, LVD 2014/35/UE, CE marked, IP 55, class F. Suitable to S1 service (continuous working at constant load).
Accessories
- Flat protection guard (CCr)
- Flexible connectors (CCga)
- Support feet (CCst)
- Inlet/outlet bell mouth (CCbo)
- Silencers, with and without pod, in three lengths (CCsa and CCsb)
- Counter flange (Ccf)
- Counter flange with collar (CCfc)
- Anti-vibration mounts.
CATALOGUE
ACCESSORIES
-
Dynair DIC-INOX Centrifugal fans in stainless steel
Construction
- Volute in stainless steel AISI304 sheet
- Single inlet forward bladed impeller (sirocco), in stainless steel AISI304
- Execution 5 (with impeller directly coupled to flanged motor)
- Standard orientation LG270°
- Motorizations: asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, B35 shape. DIC-INOX 100 T and M with motor shape B14, IP44, class B.
Accessories
- Inlet and outlet protection guard according to UNI 12499 norm
- Motor support in steel sheet protected against atmospheric agents by epoxy paint
CATALOGUE
ACCESSORIES
-
Dynair PR-AC Centrifugal fans in plastic material
Construction
- Volute in polyethylene (PE)
- Single inlet impeller, in Polypropylene (PP), with backward curved blades and aluminium hub (protected from the fluid)
- Motor support in epoxy painted steel sheet
- Asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, B3 or B5 shape. Suitable to a S1 service (continuous working to constant load)
Accessories
- Inlet protection guard according to UNI 10615
- Anti-vibration joint in PVC for inlet and outlet sides
- Gravity shutter
- Manual setting shutter
CATALOGUE
-
Dynair TAV Vertical discharge axial conveyors
Construction
- Outer conveyor with epoxy painted steel sheet base and with vertical panels in galvanized steel sheet
- Double wing aluminium gravity shutters, acoustically lined
- Coupling plate to the fan in epoxy painted steel sheet
- Weatherproof outlet protection guard according to norm UNI 10615
Accessories
TAV conveyors are suitable to be installed with CC range accessories:
- Long casing extension (CCpro)
- Intel/Outlet cone (CCbo)
- Flexible connections (CCga)
- Protection guards (CCr/CCrc)
- Flat or collar fl anges (CCf/CCfc)
- Silencers (CCsa/CCsb)
- External terminal box (mounted on fan casing)
-
Dynair FCV Single speed centrifugal roof fans – Vertical discharge
Construction
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
- Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
- Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F
- Upper cover in ABS, with appropriate slots for motor cooling
- Outer deflector in ABS
Accessories
- Backdraught gravity shutter (TS)
- Silencer (GR)
- Support base for wawed roof coverings (BA)
- Inlet Protection Guard (RA)
- Service switch
- Support base/Silenced reduction (PB)
CATALOGUE
ACCESSORIES
-
Dynair REV Centrifugal roof fans with external rotor motor – Vertical discharge
Construction
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
- Backward curved wheel in galvanized steel sheet (mod. 200 in plastic), with high efficiency and low noise level
- Outer deflector in ABS
- External rotor motor, three-phase or single phase, IP 44/B 200-250, IP 44/F 310-400, tropycalized with integral thermal protection
Accessories
- Backdraught gravity shutter (TS)
- Silencers (GR)
- Counter base to be walled up (CB)
- Support base for corrugated roof coverings (BA)
- Inlet side Guard (RA)
- Service switch
- Speed regulator
- Delta/start switch
- Support base/Silenced reduction (PB). Not available for size 200
CATALOGUE
ACCESSORIES
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair FC Single speed centrifugal roof fans – Horizontal discharge
Construction
- Base frame in galvanized steel sheet.
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997.
- Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940.
- Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F.
- Upper cover in ABS, with appropriate slots for motor cooling.
- Outer deflector (FCV) in ABS
Accessories
- Backdraught gravity shutter (TS)
- Silencer (GR)
- Support base for wawed roof coverings (BA)
- Inlet Protection Guard (RA)
- Service switch
- Support base/Silenced reduction (PB)
CATALOGUE
ACCESSORIES
-
Dynair REA Centrifugal roof fans with external rotor motor – Horizontal discharge
Construction
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
- Backward curved wheel in galvanized steel sheet (mod. 200 in plastic), with high efficiency and low noise level
- Upper cover in aluminium
- External rotor motor, three-phase or single phase, IP 44/B 200-250, IP 44/F 310-400, tropycalized with integral thermal protection.
Accessories
- Backdraught gravity shutter (TS)
- Silencers (GR)
- Counter base to be walled up (CB)
- Support base for corrugated roof coverings (BA)
- Inlet side Guard (RA)
- Service switch
- Speed regulator
- Delta/start switch
- Support base/Silenced reduction (PB). Not available for size 200
CATALOGUE
ACCESSORIES
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair AxB Super-silent acoustic cabinet fans
Construction
- Casing in galvanized steel sheet with fixing flanges of standardized dimensions
- Single-phase and three-phase electric external rotor motor, IP44, class B/F, with internal thermal protection, suitable for speed control (using the suitable speed regulators shown in this catalogue)
- Backward curved impeller for models 4×2, 5×2,5 and 5×3, forward curved impeller for models 6×3, 6×35 and 7×4
- External electric connection box, in a self-extinguishing techno-polymeric box, resistant to atmospheric agents with IP55 protection.
Accessories
- Speed regulators
- Silencers
- Flexible connections
CATALOGUE
ACCESSORIES
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair AXC – LINE METAL Round duct centrifugal in-line fans
Construction
- Casing in steel sheet, protected against atmospheric agents by epoxy paint
- Single-phase electric ball-bearing motor with non-self resetting thermal cut-out, particularly suitable for speed regulation
- Backward curved centrifugal impeller with high efficiency and low noise level. Statically and dynamically balanced according to ISO 1940
- Down stream guide vanes, for improved efficiency
- External electric connections enclosed in a terminal box in self-extinguishing technopolymer, with IP54 protection
- Comply with EN 60335-2-80, B.T. 2006/95/ CE, EMC 2004/108/CE
Accessories
- Speed regulators
- Back-draught shutters
- Protection guard
- Collars for fixing to the duct
- Silencers
CATALOGUE
ACCESSORIES
