Termékek

  • Dynair REC PRO-75Quick View

    Dynair REC Pro 75 High efficiency HRU

    Construction

    • The casing is made with double skin panels, with 25mm thick rockwool insulation with ­ re reaction class A2S1d0; external panels are in prepainted steel, internal panels in galvanized steel
    • Integrated by-pass system with actuator, for free-cooling operations
    • Access to fans and lters sections is ensured by doors with hinges and locking devices; additional access is given to the ­ lters thanks to lift-o panels
    • The units are complete with an electronic control device for the setting of the ventilation and temperature, monitoring of the status of the ­ lters, week programming, defrost management and anti-freeze device for the additional water coil module

    Accessories

    A wide range of accessories is available: consult the catalogue.

    CATALOGUE

    Compare
    View Wishlist
    Quick View
  • Dynair-CC-JCQuick View

    Dynair CC-JC Centrifugal induction fans – Car park ventilation

    Construction

    • Hub impeller and airfoil prof le blades made in aluminium. Balanced according to ISO 1940
    • Housing in electrolytically galvanized steel sheet
    • Protection guard on inlet side
    • Fixing brackets in galvanized steel sheet for ceiling/ wall installation supplied pre-assembled
    • Asynchronous three-phase double polarity motor 380-420V – 50 Hz suitable to work up to a maximum temperature of 40°C (service S1) and 300°C for 120 minutes in case of fire emergency (service S2). CE marked, IP55 protection, Class H. Suitable for continuous running (S1). Execution 5: Impeller directly coupled on the motor shaft.

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-CC-JDQuick View

    Dynair JET FANS CC JD Axial impulse fans

    Construction

    • Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
    • Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
    • Protection guard on inlet side
    • Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
    • Silencers are fi tted at both ends with an especially designed smooth bell shape to improve air performance and reduce losses and sound level
    • Housing in electrolytically galvanized steel sheet
    • Hub impeller and airfoil profi le blades made in aluminium. Balanced according to ISO 1940. Variable pitch angle in still position
    • Terminal box IP54, resistant to high temperature and supplied as standard.


    MOTOR
    Asynchronous three-phase motors 380-420V 50 Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
    Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H.
    Execution 4 (with impeller directly coupled to motor with feet).

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-DAQuick View

    Dynair DA Direct drive double inlet fans

    Construction

    • Volute in galvanized steel sheet
    • Direct drive double inlet forward curved wheel
    • Single-phase and three-phase motor (only 12/9 and 12/12), IP20, class F. Thermal protection in single-phase versions. Particularly suitable for speed regulation (using the suitable speed regulators shown in this catalogue)

    Accessories

    • Outlet flange
    • Fixing feet

    CATALOGUE

    ACCESSORIES

    Compare
    View Wishlist
    Quick View
  • Dynair-BOX-CAQuick View

    Dynair Box-CA Active carbon filtering units

    Construction

    • Frame in extruded aluminium profi les and removable double skin panels in galvanized steel sheet
    • Lining of the plenum with self-extinguishing techno-polymer material
    • Double inlet centrifugal fan with forward curved blades, driven by trapezoidal belts and adjustable pulleys. Fan and motor supported by single base frame and isolated from the main structure by anti-vibration mounts and flexible joint on the outlet
    • Filtering battery composed by wavy polyester pre-filter (class G3), pocket filter (class F7) and activated charcoal filter in cartridges
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F. Suitable for S1 service (continuous working at constant load)

    Accessories

    • Weatherproof cover

    CATALOGUE

    Compare
    View Wishlist
    Quick View
  • Dynair-BOX-TQuick View

    Dynair Box-T Belt driven double inlet box fans

    Construction

    • Frame in extruded aluminium profiles and removable panels in galvanized steel sheet
    • Plenum lining of the with self-extinguishing techno-polymer material
    • Double inlet centrifugal fan with forward curved blades, driven by trapezoidal belts and adjustable pulleys. Fan and motor supported by single base frame and isolated from the main structure by anti-vibration mounts and flexible joint on the outlet
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F. Suitable for S1 service (continuous working at constant load).

    Accessories

    • Weatherproof protection cover
    • Support feet
    • Outlet terminal with guard
    • Setting shutter
    • Setting shutter with filtering section (standard version with filter in polyester with efficiency 90.1%, class EU4).

    CATALOGUE

    Compare
    View Wishlist
    Quick View
  • Dynair-S-CUBE-KATQuick View

    Dynair S-CUBE KAT Backward curve centrifugal box fans – High temperature for industrial kitchens

    Construction

    • Aluminium frame with double skin sound absorbing insulated panels removable from the impeller side
    • Motor external to the stream, B5 execution directly coupled to the impeller
    • Sound absorbing and self-extinguishing material between the steel sheet layers of the panels
    • Galvanized steel sheet backward curved impeller dynamically balanced according to ISO1940
    • Punched mounting feet for an easy handling and fixing
    • Asynchronous squirrel cage three-phase or single-phase motors according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, Class F Suitable to S1 service (continuous running with constant load)

    Accessories

    • Water-proof protection cover
    • Anti-vibration supports
    • Floor support feet
    • Round spigot inlet cone
    • Square to round outlet adaptor
    • Flexible connector (on demand from model 35, yo be coupled with round spigot inlet cone or square to round outlet adaptor)
    • Service switch IP67
    • Grease collector tray

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Dynair-S-CUBEQuick View

    Dynair S-Cube Backward curved centrifugal box fans

    Construction

    • Frame in extruded aluminium profiles and removable double skin panels in galvanized steel sheet; all this brings to an excellent aesthetic impact
    • Acoustic lining of the panels in self-extinguishing techno-polymer
    • Backward curved impeller directly coupled to the motor
    • B3 Motor fitted using suitable reinforced support seat
    • Support brackets with holes suitable for lifting and easy installation
    • Motor equipment:
      • Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F
      • All suitable to S1 service (continuous working at constant load)

    Accessories

    • Weatherproof cover
    • Rainproof discharge outlet with guard
    • Anti-vibration supports
    • Floor support feet
    • Square/Round outlet connector

    CATALOGUE

    ACCESSORIES

    Compare
    View Wishlist
    Quick View
  • Dynair-BOX-DQuick View

    Dynair Box-D Direct drive double inlet box fans

    Construction

    • Frame in extruded aluminium profile; removable panels in galvanized steel sheet; all this brings to an excellent aesthetic impact. Weatherproof cover in galvanized steel sheet
    • The blower is fitted using suitable support feet and is completely isolated from the casing by anti-vibration mounts and gaskets
    • Acoustic lining in self-extinguishing technopolymer
    • Double inlet blower, forward curved, with direct drive built-in asynchronous motor, singlephase or three-phase, IP20, class F, particularly suitable for speed regulation (using the suitable speed regulators shown in this catalogue)
    • Weatherproof upper cover with suitable holes for lifting hooks

    Accessories

    • Rainproof outlet with guard
    • Support feet
    • Filtering section (standard version with filter in polyester with efficiency 90.1%, class EU4).

    CATALOGUE

    ACCESSORIES

    Compare
    View Wishlist
    Quick View
  • Dynair-MINI-BOXQuick View

    Dynair Mini-Box Slim-line acoustic cabinet fans

    Construction

    • Casing in galvanized steel sheet, lined with acoustic insulation (thickness 10 mm).
    • Single-phase electric motor, IP44, class F, with thermal protection, suitable for speed control.
    • Fitting bracket
    • Backward curved impeller with high effi ciency and low noise level.
    • Outer terminal box IP55.

    Accessories

    • Electric duct heaters BE.
    • Backdraught shutters.
    • Duct clamps.
    • Protection guards

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Quick View

    Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, , designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Quick View

    Dynair PV-L/INOX Backward curved blade centrifugal fans for dusty air

    Construction

    • Volute casing in steel sheet , protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted
    • For high rotational speed, versions in class 3 are foreseen
    • For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, , designed for easy lubrication
    • Pulleys, belts and motor support. Belt protection guard
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Compare
    View Wishlist
    Quick View
x