Termékek

  • Quick View

    Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, , designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-PQ-LQuick View

    Dynair PQ-L Backward curved blade centrifugal fans for dusty air

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • For execution 1–9–12: mono-block support in cast iron with ball bearings, designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard.
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load).

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-PQ-L-ATQuick View

    Dynair PQ-L ATEX Backward curved blade centrifugal fans

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint. Connection flanges ISO 6580/EUROVENT 1-2
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • Aerodynamically shaped inlet cone
    • Execution 4 directly coupled and executions 1-9-12 with mono-block support in cast iron with ball bearings, designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard according to EN12499

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-multibox-ECQuick View

    Dynair MULTIBOX Centralized single flow extract ventilation

    Construction

    • Casing in galvanised steel sheet.
    • Backward blade impeller for high efficiency and low noise level.
    • Easy access to motor and impeller for inspection.
    • Compliance with EN 60335-2-80, B.T. 2014/35/UE, EMC 2014/30/UE
    • IPX4

    Accessories

    • RLS 1 WR Remote control for the manual selection of the ventilation level (min/Intermediate/high). Suitable for Microbox EC.
    • RLS 3V Remote control for the manual selection of the ventilation level (min/Intermediate/high) and On/Off switch. Suitable for Microvox 3V AC.

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-MINI-BOXQuick View

    Dynair Mini-Box Slim-line acoustic cabinet fans

    Construction

    • Casing in galvanized steel sheet, lined with acoustic insulation (thickness 10 mm).
    • Single-phase electric motor, IP44, class F, with thermal protection, suitable for speed control.
    • Fitting bracket
    • Backward curved impeller with high effi ciency and low noise level.
    • Outer terminal box IP55.

    Accessories

    • Electric duct heaters BE.
    • Backdraught shutters.
    • Duct clamps.
    • Protection guards

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • DYNAIR-MICROBOX-EBOX-MICROQuick View

    Dynair MICROBOX Centralized single flow extract ventilation

    Construction

    • Casing in galvanised steel sheet inside lined with acoustic insulation.
    • Backward blade impeller for high efficiency and low noise level.
    • Wall/ceiling fixing kit for an easy and quick installation (Maico Italia patent).
    • Easy access to motor and impeller for inspection.
    • Supplied with plastic sealing rings for the spigots.
    • Compliance with EN 60335-2-80, B.T. 2014/35/UE, EMC 2014/30/UE
    • IPX4

    Accessories

    • RLS 1 WR Remote control for the manual selection of the ventilation level (min / Intermediate / high). Suitable for Microbox EC.
    • RLS 3V Remote control for the manual selection of the ventilation level (min / Intermediate / high) and On/Off switch. Suitable for Microvox 3V AC.

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-JET-FANS-CC-JD-LP-Axial-impulse-fans-Low-profile-shapeQuick View

    Dynair JET FANS CC JD LP Axial impulse fans – Low profile shape

    Construction

    • Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
    • Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
    • Protection guard on inlet side
    • Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
    • Octagonal shaped silencers
    • Housing in electrolytically galvanized steel sheet
    • Hub impeller and airfoil profile blades made in aluminium. Balanced according to ISO 1940 G.6.3. Variable pitch angle in still position
    • Terminal box IP54, resistant to high temperature and supplied as standard
    • Asynchronous three-phase motors 380-420V 50Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE. Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H. Execution 4 (with impeller directly coupled to motor with feet).

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-CC-JDQuick View

    Dynair JET FANS CC JD Axial impulse fans

    Construction

    • Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
    • Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
    • Protection guard on inlet side
    • Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
    • Silencers are fi tted at both ends with an especially designed smooth bell shape to improve air performance and reduce losses and sound level
    • Housing in electrolytically galvanized steel sheet
    • Hub impeller and airfoil profi le blades made in aluminium. Balanced according to ISO 1940. Variable pitch angle in still position
    • Terminal box IP54, resistant to high temperature and supplied as standard.


    MOTOR
    Asynchronous three-phase motors 380-420V 50 Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
    Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H.
    Execution 4 (with impeller directly coupled to motor with feet).

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-inverter-and-line-filterQuick View

    Dynair Inverter and Line filter

    VSD – Variable Speed Drive.

    • SPWM Control
    • Integrated EMI filter
    • Settable operation functions
    • Interface MODBAS RS485.
    • Upon request DeviceNet, Profi bus, Lon Works, CANopen protocols
    • Wall installation, optional DIN bar

    VFD “EL”: Keypad with incorporated fixed potentiometer.
    VFD “E”: Integrated PLC. Keypad with removable potentiometer, ideal for multiple installations with a unique and remote-manageable programmation (a cable of 5 mt max. length is available upon request). Mounting port for extension card available.

    KATALOG

     

    Compare
    Wishlist
    Quick View
  • dynair-FCV-Single-speed-centrifugal-roof-fans-Vertical-dischargeQuick View

    Dynair FCV Single speed centrifugal roof fans – Vertical discharge

    Construction

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
    • Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
    • Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F
    • Upper cover in ABS, with appropriate slots for motor cooling
    • Outer deflector in ABS

    Accessories

    • Backdraught gravity shutter (TS)
    • Silencer (GR)
    • Support base for wawed roof coverings (BA)
    • Inlet Protection Guard (RA)
    • Service switch
    • Support base/Silenced reduction (PB)

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • dynair-FCV-Single-speed-centrifugal-roof-fans-Vertical-dischargeQuick View

    Dynair FCV 2V Double speed centrifugal roof fans – Vertical discharge

    Construction

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
    • Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
    • Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F.
    • Upper cover in ABS, with appropriate slots for motor cooling
    • Outer deflector in ABS

    Accessories

    • Backdraught gravity shutter (TS)
    • Silencer (GR)
    • Support base for wawed roof coverings (BA)
    • Inlet Protection Guard (RA)
    • Service switch
    • Support base/Silenced reduction (PB)

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Dynair-FC-HTQuick View

    Dynair FC-HT Centrifugal roof fans F400

    Construction

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents
    • Backward curved wheel in galvanized steel sheet, with high effi ciency and low noise level, statically and dynamically balanced according ISO 1940
    • Upper cover in ABS, with appropriate slots for motor cooling (collapsing controlled cowl in case of fire)
    • Double speed asynchronous three-phase motor manufactured according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F. Electric supply: 400V / 50 HZ three phase

    Accessories

    • Counter-base to be walled-up (CB)
    • Inlet side grid (CCr)

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Quick View

    Dynair FC Single speed centrifugal roof fans – Horizontal discharge

    Construction

    • Base frame in galvanized steel sheet.
    • Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997.
    • Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940.
    • Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F.
    • Upper cover in ABS, with appropriate slots for motor cooling.
    • Outer deflector (FCV) in ABS

     

    Accessories

    • Backdraught gravity shutter (TS)
    • Silencer (GR)
    • Support base for wawed roof coverings (BA)
    • Inlet Protection Guard (RA)
    • Service switch
    • Support base/Silenced reduction (PB)

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Quick View

    Dynair FC AT – FC 2V AT Single or dpouble speed centrifugal roof fans for air temperature up to 200°C

    CONSTRUCTION

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI EN 12499
    • Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
    • Upper cover in aluminium, with appropriate slots for motor cooling
    • Asynchronous three-phase motor or singlephase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked,
      IP 55, class F

    ACCESSORIES

    • Backdraught gravity shutter (TS)
    • Silencer (GR)
    • Counterbase (CB)
    • Support base for wawed roof coverings (BA)
    • Inlet Protection Guard (RA)
    • Service switch
    • Support base/Silenced reduction (PB)
    • Flat protection guard (CCr)

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Quick View

    Dynair FC 2V Double speed centrifugal roof fans – Horinzontal discharge

    Construction

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
    • Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
    • Asynchronous and double polarity three-phase motor manufactured according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP55 Class F.
    • Upper cover in techno-polymer, with appropriate slots for motor cooling
    • Outer deflector   in techno-polymer.

    Accessories

    • Backdraught gravity shutter (TS)
    • Silencers (GR)
    • Counterbase (CB)
    • Support base for wawed roof coverings (BA)
    • Inlet side Guard (RA)
    • Service switch
    • Self transformer speed regulator
    • Delta/start switch
    • Support base/Silenced reduction (PB)

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Dynair-FQuick View

    Dynair F Radial blade centrifugal fans in aluminium

    Construction

    • Volute casing in die cast aluminium, protected against atmospheric agent by epoxy paint. Support feet are integral part of the casing
    • Single inlet, open blade, radial impeller in die cast aluminium
    • Execution 5 (with impeller directly coupled to flanged motor)
    • Fixed orientation RD 270°
    • Asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/34/UE, LVD 2014/35/UE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load).

    Accessories

    • Inlet protection guard manufactured according to UNI 12499 norm and protected against the atmospheric agents.

    CATALOGUE

    Compare
    View Wishlist
    Quick View
  • Quick View

    Dynair ERM-EX Enhanced safety mixed flow fans

    The ERM-EX fans are the only mixed fl ow in line series in increased safety execution “EExe“ available on the market.

    The particular construction allows the installation in hazardous environment as: battery rooms, dyeing-plants, garages, etc.
    Suitable to convey clean air with working temperature from -20°C to 50°C.
    The ERM-EX are not suitable for regulation.

    Accessories

    • Reduction
    • Protection guard
    • Fixing clamps

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • dynair-DIC-INOX-centrifugal-fans-in-stainless-steelQuick View

    Dynair DIC-INOX Centrifugal fans in stainless steel

    Construction

    • Volute in stainless steel AISI304 sheet
    • Single inlet forward bladed impeller (sirocco), in stainless steel AISI304
    • Execution 5 (with impeller directly coupled to flanged motor)
    • Standard orientation LG270°
    • Motorizations: asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, B35 shape. DIC-INOX 100 T and M with motor shape B14, IP44, class B.

    Accessories

    • Inlet and outlet protection guard according to UNI 12499 norm
    • Motor support in steel sheet protected against atmospheric agents by epoxy paint

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Quick View

    Dynair DIC-ATEX – DIC-INOX-ATEX Forward curved blade centrifugal fans

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint or in stainless steel AISI304 sheet
    • Single inlet, single gauge, forward curved impeller (sirocco type), in galvanized steel sheet or in stainless steel AISI304
    • Steel sheet inlet with epoxy finish or inox inlet on models IIB. Brass inlet on models with execution IIC
    • Execution 5 (with impeller directly coupled to flanged motor)
    • Motor separated from the conveyed airflow
    • Standard orientation LG270°
    • Inlet connector supplied (disassembled)
    • DIC-ATX and DIC-ATX INOX asynchronous three- phase motors or single-phase according to international standards IEC 60034, IEC 60072, IEC 60079 and/or IEC61241, EMC 2004/108/ CE, LVD 2006/95/CE, with Atex certification for explosive atmospheres category G group II thermal class T4 protection Exd, CE marked, IP55, class F, B35 shape. Suitable to S1 service (continuous working at constant load)

    Accessories

    • Motor support in steel or steel sheet
    • Inlet and outlet protection guard manufactured according to UNI 12499 norm and protected against the atmospheric agents

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • dynair-dicQuick View

    Dynair DIC Forward curved blade centrifugal fans

    Construction

    • Volute casing in steel sheet, protected againstatmospheric agents by epoxy paint
    • Single inlet, single width, forward curved impeller (sirocco type), in galvanized steel sheet
    • Execution 5 (with impeller directly coupled to flanged motor)
    • Standard orientation LG 270°
    • Motorization: Asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, B35 shape. DIC 100 T and M with motor shape B14, IP44, class B. All motors suitable to S1 service (continuous working at constant load).

    Accessories

    • Inlet and outlet protection guard according to UNI 10615 rules and protected against atmospheric agents
    • Motor support in steel sheet epoxy painted.

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Quick View

    Dynair DIC AT Forward curved blade centrifugal fans for air temperature up to +150°C

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet, single width forward curved impeller (sirocco type), in galvanized steel sheet
    • Execution 5 (with impeller directly coupled to flanged motor)
    • Standard orientation LG270°
    • Asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, B35 shape. DIC 100 T and M with motor shape B14, IP44, class B.

    Accessories

    • Inlet and outlet protection guard according to UNI 12499 rules and protected against atmospheric agents
    • Motor support in steel sheet epoxy painted.

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • dynair-da-t-round-duct-backward-bladed-centrifugal-fanQuick View

    Dynair DA-T Direct drive double inlet fans without motor

    The fans of the DA-T series are suitable in plants of ventilation and air conditioning, filtering and heating. They can only handle clean air with temperature range from -20°C to +80°C and to work they require a containing structure (plenum).

    The fans must be used within the limits shown in the relevant table.They can only handle clean air up to the maximum temperature of 40°C and to work they require a containing structure (plenum). The fans must be used within the limits shown in the relevant table.

    Upon request:

    • “CUBIK” version.

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Dynair-DAQuick View

    Dynair DA Direct drive double inlet fans

    Construction

    • Volute in galvanized steel sheet
    • Direct drive double inlet forward curved wheel
    • Single-phase and three-phase motor (only 12/9 and 12/12), IP20, class F. Thermal protection in single-phase versions. Particularly suitable for speed regulation (using the suitable speed regulators shown in this catalogue)

    Accessories

    • Outlet flange
    • Fixing feet

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • Dynair-CCZQuick View

    Dynair CCZ Compact and high efficiency ducted axial fans

    Construction

    • Short casing in steel sheet, with fixing flanges manufactured according to UNI ISO 6580-EUROVENT standard. Protected against atmospheric agents by epoxy paint
    • High quality aerofoil profiled impellers in mineral fibres reinforced technopolymer (310 to 400) and diecast aluminum alloy (450 to 560). Blades are directly fixed to the motor external rotor
    • Execution 5 (with impeller directly coupled to the motor) and airflow from motor to impeller
    • External rotor motors with built-in thermal protection, double speed three-phase and single- phase, speed adjustable. All motors with mounted connection box

    Accessories

    • Flat protection guard (CCr)
    • Flexible connectors (CCga)
    • Support feet (CCst)
    • Inlet/outlet bell mouth (CCbo)
    • Silencers, with and without pod, in three lengths (CCsa and CCsb)
    • Counter flange (Ccf)
    • Counter flange with collar (CCfc)
    • Anti-vibration mounts.

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
x