Termékek
-
Dynair DIC-INOX Centrifugal fans in stainless steel
Construction
- Volute in stainless steel AISI304 sheet
- Single inlet forward bladed impeller (sirocco), in stainless steel AISI304
- Execution 5 (with impeller directly coupled to flanged motor)
- Standard orientation LG270°
- Motorizations: asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F, B35 shape. DIC-INOX 100 T and M with motor shape B14, IP44, class B.
Accessories
- Inlet and outlet protection guard according to UNI 12499 norm
- Motor support in steel sheet protected against atmospheric agents by epoxy paint
CATALOGUE
ACCESSORIES
-
Dynair ERM-EX Enhanced safety mixed flow fans
The ERM-EX fans are the only mixed fl ow in line series in increased safety execution “EExe“ available on the market.
The particular construction allows the installation in hazardous environment as: battery rooms, dyeing-plants, garages, etc.
Suitable to convey clean air with working temperature from -20°C to 50°C.
The ERM-EX are not suitable for regulation.Accessories
- Reduction
- Protection guard
- Fixing clamps
CATALOGUE
-
Dynair F Radial blade centrifugal fans in aluminium
Construction
- Volute casing in die cast aluminium, protected against atmospheric agent by epoxy paint. Support feet are integral part of the casing
- Single inlet, open blade, radial impeller in die cast aluminium
- Execution 5 (with impeller directly coupled to flanged motor)
- Fixed orientation RD 270°
- Asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2014/34/UE, LVD 2014/35/UE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load).
Accessories
- Inlet protection guard manufactured according to UNI 12499 norm and protected against the atmospheric agents.
CATALOGUE
-
Dynair FC 2V Double speed centrifugal roof fans – Horinzontal discharge
Construction
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
- Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
- Asynchronous and double polarity three-phase motor manufactured according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP55 Class F.
- Upper cover in techno-polymer, with appropriate slots for motor cooling
- Outer deflector in techno-polymer.
Accessories
- Backdraught gravity shutter (TS)
- Silencers (GR)
- Counterbase (CB)
- Support base for wawed roof coverings (BA)
- Inlet side Guard (RA)
- Service switch
- Self transformer speed regulator
- Delta/start switch
- Support base/Silenced reduction (PB)
CATALOGUE
ACCESSORIES
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair FC AT – FC 2V AT Single or dpouble speed centrifugal roof fans for air temperature up to 200°C
CONSTRUCTION
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI EN 12499
- Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
- Upper cover in aluminium, with appropriate slots for motor cooling
- Asynchronous three-phase motor or singlephase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked,
IP 55, class F
ACCESSORIES
- Backdraught gravity shutter (TS)
- Silencer (GR)
- Counterbase (CB)
- Support base for wawed roof coverings (BA)
- Inlet Protection Guard (RA)
- Service switch
- Support base/Silenced reduction (PB)
- Flat protection guard (CCr)
CATALOGUE
-
Dynair FC Single speed centrifugal roof fans – Horizontal discharge
Construction
- Base frame in galvanized steel sheet.
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997.
- Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940.
- Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F.
- Upper cover in ABS, with appropriate slots for motor cooling.
- Outer deflector (FCV) in ABS
Accessories
- Backdraught gravity shutter (TS)
- Silencer (GR)
- Support base for wawed roof coverings (BA)
- Inlet Protection Guard (RA)
- Service switch
- Support base/Silenced reduction (PB)
CATALOGUE
ACCESSORIES
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair FC-HT Centrifugal roof fans F400
Construction
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents
- Backward curved wheel in galvanized steel sheet, with high effi ciency and low noise level, statically and dynamically balanced according ISO 1940
- Upper cover in ABS, with appropriate slots for motor cooling (collapsing controlled cowl in case of fire)
- Double speed asynchronous three-phase motor manufactured according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F. Electric supply: 400V / 50 HZ three phase
Accessories
- Counter-base to be walled-up (CB)
- Inlet side grid (CCr)
CATALOGUE
-
Dynair FCV 2V Double speed centrifugal roof fans – Vertical discharge
Construction
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
- Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
- Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F.
- Upper cover in ABS, with appropriate slots for motor cooling
- Outer deflector in ABS
Accessories
- Backdraught gravity shutter (TS)
- Silencer (GR)
- Support base for wawed roof coverings (BA)
- Inlet Protection Guard (RA)
- Service switch
- Support base/Silenced reduction (PB)
CATALOGUE
ACCESSORIES
-
Dynair FCV Single speed centrifugal roof fans – Vertical discharge
Construction
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
- Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
- Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F
- Upper cover in ABS, with appropriate slots for motor cooling
- Outer deflector in ABS
Accessories
- Backdraught gravity shutter (TS)
- Silencer (GR)
- Support base for wawed roof coverings (BA)
- Inlet Protection Guard (RA)
- Service switch
- Support base/Silenced reduction (PB)
CATALOGUE
ACCESSORIES
-
Dynair Inverter and Line filter
VSD – Variable Speed Drive.
- SPWM Control
- Integrated EMI filter
- Settable operation functions
- Interface MODBAS RS485.
- Upon request DeviceNet, Profi bus, Lon Works, CANopen protocols
- Wall installation, optional DIN bar
VFD “EL”: Keypad with incorporated fixed potentiometer.
VFD “E”: Integrated PLC. Keypad with removable potentiometer, ideal for multiple installations with a unique and remote-manageable programmation (a cable of 5 mt max. length is available upon request). Mounting port for extension card available.KATALOG
-
Dynair JET FANS CC JD Axial impulse fans
Construction
- Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
- Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
- Protection guard on inlet side
- Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
- Silencers are fi tted at both ends with an especially designed smooth bell shape to improve air performance and reduce losses and sound level
- Housing in electrolytically galvanized steel sheet
- Hub impeller and airfoil profi le blades made in aluminium. Balanced according to ISO 1940. Variable pitch angle in still position
- Terminal box IP54, resistant to high temperature and supplied as standard.
MOTOR
Asynchronous three-phase motors 380-420V 50 Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H.
Execution 4 (with impeller directly coupled to motor with feet).CATALOGUE
-
Dynair JET FANS CC JD LP Axial impulse fans – Low profile shape
Construction
- Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
- Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
- Protection guard on inlet side
- Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
- Octagonal shaped silencers
- Housing in electrolytically galvanized steel sheet
- Hub impeller and airfoil profile blades made in aluminium. Balanced according to ISO 1940 G.6.3. Variable pitch angle in still position
- Terminal box IP54, resistant to high temperature and supplied as standard
- Asynchronous three-phase motors 380-420V 50Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE. Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H. Execution 4 (with impeller directly coupled to motor with feet).
CATALOGUE
