Termékek

  • Quick View

    Dynair PQ-L/INOX Backward curved blade centrifugal fans for dusty air

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • For execution 1 – 9 – 12: mono-block support in cast iron with ball bearings, , designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load)

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-PQ-LQuick View

    Dynair PQ-L Backward curved blade centrifugal fans for dusty air

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint
    • Aerodynamically shaped inlet cone in steel sheet, protected against atmospheric agents by epoxy paint
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • For execution 1–9–12: mono-block support in cast iron with ball bearings, designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard.
    • Asynchronous three-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F, suitable to S1 service (continuous working at constant load).

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-PQ-L-ATQuick View

    Dynair PQ-L ATEX Backward curved blade centrifugal fans

    Construction

    • Volute casing in steel sheet, protected against atmospheric agents by epoxy paint. Connection flanges ISO 6580/EUROVENT 1-2
    • Single inlet backward curved wheel with high efficiency, manufactured in steel sheet and epoxy painted. For high rotational speed, versions in class 3 are foreseen
    • Aerodynamically shaped inlet cone
    • Execution 4 directly coupled and executions 1-9-12 with mono-block support in cast iron with ball bearings, designed for easy lubrication. Pulleys, belts and motor support. Belt protection guard according to EN12499

    Accessories

    • Condensation drain hole (TS)
    • Inspection door (PI)
    • Inlet counter-flange (CFA)
    • Outlet counter-flange (CFP)
    • Inlet protection guard (RA)
    • Outlet protection guard (RP)
    • Inlet flexible connector (GA)
    • Outlet flexible connector (GP)
    • Inlet vane control
    • Outlet setting shutter
    • Anti-vibration mounts

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-multibox-ECQuick View

    Dynair MULTIBOX Centralized single flow extract ventilation

    Construction

    • Casing in galvanised steel sheet.
    • Backward blade impeller for high efficiency and low noise level.
    • Easy access to motor and impeller for inspection.
    • Compliance with EN 60335-2-80, B.T. 2014/35/UE, EMC 2014/30/UE
    • IPX4

    Accessories

    • RLS 1 WR Remote control for the manual selection of the ventilation level (min/Intermediate/high). Suitable for Microbox EC.
    • RLS 3V Remote control for the manual selection of the ventilation level (min/Intermediate/high) and On/Off switch. Suitable for Microvox 3V AC.

    CATALOGUE

    Compare
    View Wishlist
    Quick View
  • Dynair-MINI-BOXQuick View

    Dynair Mini-Box Slim-line acoustic cabinet fans

    Construction

    • Casing in galvanized steel sheet, lined with acoustic insulation (thickness 10 mm).
    • Single-phase electric motor, IP44, class F, with thermal protection, suitable for speed control.
    • Fitting bracket
    • Backward curved impeller with high effi ciency and low noise level.
    • Outer terminal box IP55.

    Accessories

    • Electric duct heaters BE.
    • Backdraught shutters.
    • Duct clamps.
    • Protection guards

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • DYNAIR-MICROBOX-EBOX-MICROQuick View

    Dynair MICROBOX Centralized single flow extract ventilation

    Construction

    • Casing in galvanised steel sheet inside lined with acoustic insulation.
    • Backward blade impeller for high efficiency and low noise level.
    • Wall/ceiling fixing kit for an easy and quick installation (Maico Italia patent).
    • Easy access to motor and impeller for inspection.
    • Supplied with plastic sealing rings for the spigots.
    • Compliance with EN 60335-2-80, B.T. 2014/35/UE, EMC 2014/30/UE
    • IPX4

    Accessories

    • RLS 1 WR Remote control for the manual selection of the ventilation level (min / Intermediate / high). Suitable for Microbox EC.
    • RLS 3V Remote control for the manual selection of the ventilation level (min / Intermediate / high) and On/Off switch. Suitable for Microvox 3V AC.

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-JET-FANS-CC-JD-LP-Axial-impulse-fans-Low-profile-shapeQuick View

    Dynair JET FANS CC JD LP Axial impulse fans – Low profile shape

    Construction

    • Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
    • Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
    • Protection guard on inlet side
    • Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
    • Octagonal shaped silencers
    • Housing in electrolytically galvanized steel sheet
    • Hub impeller and airfoil profile blades made in aluminium. Balanced according to ISO 1940 G.6.3. Variable pitch angle in still position
    • Terminal box IP54, resistant to high temperature and supplied as standard
    • Asynchronous three-phase motors 380-420V 50Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE. Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H. Execution 4 (with impeller directly coupled to motor with feet).

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-CC-JDQuick View

    Dynair JET FANS CC JD Axial impulse fans

    Construction

    • Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
    • Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
    • Protection guard on inlet side
    • Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
    • Silencers are fi tted at both ends with an especially designed smooth bell shape to improve air performance and reduce losses and sound level
    • Housing in electrolytically galvanized steel sheet
    • Hub impeller and airfoil profi le blades made in aluminium. Balanced according to ISO 1940. Variable pitch angle in still position
    • Terminal box IP54, resistant to high temperature and supplied as standard.


    MOTOR
    Asynchronous three-phase motors 380-420V 50 Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE.
    Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H.
    Execution 4 (with impeller directly coupled to motor with feet).

    CATALOGUE

    Compare
    Wishlist
    Quick View
  • Dynair-inverter-and-line-filterQuick View

    Dynair Inverter and Line filter

    VSD – Variable Speed Drive.

    • SPWM Control
    • Integrated EMI filter
    • Settable operation functions
    • Interface MODBAS RS485.
    • Upon request DeviceNet, Profi bus, Lon Works, CANopen protocols
    • Wall installation, optional DIN bar

    VFD “EL”: Keypad with incorporated fixed potentiometer.
    VFD “E”: Integrated PLC. Keypad with removable potentiometer, ideal for multiple installations with a unique and remote-manageable programmation (a cable of 5 mt max. length is available upon request). Mounting port for extension card available.

    KATALOG

     

    Compare
    Wishlist
    Quick View
  • dynair-FCV-Single-speed-centrifugal-roof-fans-Vertical-dischargeQuick View

    Dynair FCV Single speed centrifugal roof fans – Vertical discharge

    Construction

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
    • Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
    • Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F
    • Upper cover in ABS, with appropriate slots for motor cooling
    • Outer deflector in ABS

    Accessories

    • Backdraught gravity shutter (TS)
    • Silencer (GR)
    • Support base for wawed roof coverings (BA)
    • Inlet Protection Guard (RA)
    • Service switch
    • Support base/Silenced reduction (PB)

    CATALOGUE

    ACCESSORIES

    Compare
    Wishlist
    Quick View
  • dynair-FCV-Single-speed-centrifugal-roof-fans-Vertical-dischargeQuick View

    Dynair FCV 2V Double speed centrifugal roof fans – Vertical discharge

    Construction

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
    • Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
    • Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F.
    • Upper cover in ABS, with appropriate slots for motor cooling
    • Outer deflector in ABS

    Accessories

    • Backdraught gravity shutter (TS)
    • Silencer (GR)
    • Support base for wawed roof coverings (BA)
    • Inlet Protection Guard (RA)
    • Service switch
    • Support base/Silenced reduction (PB)

    CATALOGUE

    ACCESSORIES

    Compare
    View Wishlist
    Quick View
  • Dynair-FC-HTQuick View

    Dynair FC-HT Centrifugal roof fans F400

    Construction

    • Base frame in galvanized steel sheet
    • Protection guard in drawn steel rod protected against the atmospheric agents
    • Backward curved wheel in galvanized steel sheet, with high effi ciency and low noise level, statically and dynamically balanced according ISO 1940
    • Upper cover in ABS, with appropriate slots for motor cooling (collapsing controlled cowl in case of fire)
    • Double speed asynchronous three-phase motor manufactured according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE, CE marked, IP 55, class F. Electric supply: 400V / 50 HZ three phase

    Accessories

    • Counter-base to be walled-up (CB)
    • Inlet side grid (CCr)

    CATALOGUE

    Compare
    Wishlist
    Quick View
x