Termékek
-
Dynair FCV 2V Double speed centrifugal roof fans – Vertical discharge
Construction
- Base frame in galvanized steel sheet
- Protection guard in drawn steel rod protected against the atmospheric agents, manufactured according to UNI 10615:1997
- Backward curved wheel in galvanized steel sheet, with high efficiency and low noise level, statically and dynamically balanced according ISO 1940
- Asynchronous three-phase motor or single-phase motor manufactured according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/ CE, CE marked, IP 55, class F.
- Upper cover in ABS, with appropriate slots for motor cooling
- Outer deflector in ABS
Accessories
- Backdraught gravity shutter (TS)
- Silencer (GR)
- Support base for wawed roof coverings (BA)
- Inlet Protection Guard (RA)
- Service switch
- Support base/Silenced reduction (PB)
CATALOGUE
ACCESSORIES
-
Dynair CC-HP High performance ducted axial fan
Construction
- Short casing in steel sheet, with fixing flanges manufactured according to UNI ISO 6580-EUROVENT standard. Protected against atmospheric agents by epoxy paint
- Axial impeller with aerofoil profile blades in glass reinforce polyamide and die-cast aluminium hub, balanced according ISO 1940. Variable pitch angle in still position with setting means
- Execution 4 (with impeller directly coupled to motor with feet) and airflow from motor to impeller
Motorizations:
- CC: asynchronous three-phase or single-phase motors according to international standards IEC 600034, IEC 60072, EMC 2004/108/CE, LVD 2006/95/CE, CE marked, IP 55, class F.
- CC-ATX: asynchronous three-phase motors or single-phase II2G,II2D,II2GD according to international standards IEC 60034, IEC 60072, IEC 60079 and/or IEC61241, EMC 2004/108/ CE, LVD 2006/95/CE, with Atex certification, CE marked, IP55/IP 65, class F.
- All motors suitable to S1 service (continuous working at constant load).
Accessories
- Extension (for long casing version) with inspection porthole (CCpro)
- Flat protection guard (CCr)
- Conic protection guard (CCrc)
- Flexible connectors (CCga)
- Support feet (CCst)
- Inlet/outlet bell mouth (CCbo)
- Silencers, with and without pod, in three lengths (CCsa and CCsb)
- Counter flange (Ccf)
- Counter flange with collar (CCfc)
- Anti-vibration mounts
CATALOGUE
ACCESSORIES
-
Dynair CCZ Compact and high efficiency ducted axial fans
Construction
- Short casing in steel sheet, with fixing flanges manufactured according to UNI ISO 6580-EUROVENT standard. Protected against atmospheric agents by epoxy paint
- High quality aerofoil profiled impellers in mineral fibres reinforced technopolymer (310 to 400) and diecast aluminum alloy (450 to 560). Blades are directly fixed to the motor external rotor
- Execution 5 (with impeller directly coupled to the motor) and airflow from motor to impeller
- External rotor motors with built-in thermal protection, double speed three-phase and single- phase, speed adjustable. All motors with mounted connection box
Accessories
- Flat protection guard (CCr)
- Flexible connectors (CCga)
- Support feet (CCst)
- Inlet/outlet bell mouth (CCbo)
- Silencers, with and without pod, in three lengths (CCsa and CCsb)
- Counter flange (Ccf)
- Counter flange with collar (CCfc)
- Anti-vibration mounts.
CATALOGUE
ACCESSORIES
-
Dynair ZOO Belt driven axial fans
Construction
- Belt-driven fans
- Airflow outside the motor
- Housing manufactured in galvanized steel sheet
- Impeller blades made of stainless steel AISI 304 with aluminium hub
- Asynchronous three phase motor ball bearing motors 230/400V – 50Hz suitable for continuous running
- Protection grade IP54, Class F
CATALOGUE
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair SS-BOX Super-silent acoustic cabinet fans
Construction
- Main structure in galvanized steel sheet, inside lined with extra-thick acoustic insulation (50 mm)
- Single-phase electric motor, IP44/IP20, class F, with thermal protection, suitable for speed regulation (using the suitable speed regulators shown in this catalogue)
- Backward bladed impeller with high efficiency (mod.125-160-200-250)
- Double inlet forward bladed fan (mod. 315-355-400-450)
Accessories
- Speed regulators
- Shutters
- Protection guards
- Collars for fixing to the duct
- Silencers
CATALOGUE
ACCESSORIES
-
Dynair BOX-T HT Belt driven double inlet box fans F400
Construction
- Dismountable cabinet in galvanized steel sheet. Double inlet impeller with forward curved blades in galvanized steel sheet
- Belt coupling with self aligning supports, outside the airflow. Height adjustable motor support plate for the tensioning of the belt. Belt coupling is protected by a guard in galvanized sheet
- Asynchronous three-phase motor, IP 55 mechanical protection, insulation class F, single or double polarity, suitable for S1 service, mounting type B3, construction according to IEC/EEC
(UNEL MEC) - Arrangement 9: belt coupling with motor placed on the upper panel
- Arrangement 12: belt coupling with motor placed aside on a common basement (only for motors above 7.5kW)
Accessories
- Rainproof cover for outdoor installation
CATALOGUE
-
Dynair SVP Fire fighting lobbies
The pressurization of the lobby can be made in 2 modalities according to the configuration of the lobby:
1. Pressurization ONLY in case of emergency: this is the case of lobbies in which doors are usually kept opened.
2. Continuous pressurization of the lobby 24h running: this is the case of lobbies in which doors are usually kept closed.
CATALOGUE
-
Dynair REIDUCT-Q Aeraulic square ducting EI120
With REIDUCT ducting system it is possible to design highly valuable aeraulic systems ensuring the correct fire division areas, in perfect compliance with the regulations.
Ducts and connectors are made in metal to achieve a perfect connection between the pressurizing unit (fan) and the air intake elements. They ensure a perfect distribution of the air with low pressure losses.They complete the SVP system for fire-fighting lobbies.
Available with circular section: REIDUCT-CCATALOGUE
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair REIDUCT-C Aeraulic circular ducting EI120
With REIDUCT-C ducting system it is possible to design highly valuable aeraulic systems ensuring the correct fire division areas, in perfect compliance with the regulations.
It consists of modular elements of circular cross-section, available in diameters 200 ÷ 300mm.
They complete the SVP system for fire-fighting lobbies.
They are availbel with square section: REIDUCT-QCATALOGUE
Quick ViewA termék már hozzá lett adva! View Wishlist -
Dynair Ancillary control systems
Control panels – CO and gas sensors
CE 408 – Panel for small systems – from 4 to 8 CO sensors
- Equipped with 4 inputs and 5 relays expandable upto 8 inputs and 9 relays
- IP 40
CE 424 – Panel for medium size systems – from 4 to 24 CO sensors
- Equipped with 4 inputs and 5 relays expandable up to 24 inputs and 25 relays
- IP 40
CE 700 – Panel for large systems up to 200 sensors
- Equipped with 16 inputs expandable up to 184 for a total of 200 CO sensors
- Wall or rack versions
- IP 40
Industrial gas detectors (single or double gas):
Replaceable catalytic, electrochemical, pellistor cartridge.
Suitable for CO, petrol vapours and other gases according to the reference Norm.
IP65CATALOGUE
-
Dynair JET FANS CC JD LP Axial impulse fans – Low profile shape
Construction
- Silencers in galvanized steel sheet inside lined with high performance acoustic insulation material
- Deflector on outlet side for optimum air discharge and air cleaning of all layers. Supplied as standard
- Protection guard on inlet side
- Fixing brackets in galvanized steel sheet for ceiling (or wall) installation. Supplied as standard and pre-assembled
- Octagonal shaped silencers
- Housing in electrolytically galvanized steel sheet
- Hub impeller and airfoil profile blades made in aluminium. Balanced according to ISO 1940 G.6.3. Variable pitch angle in still position
- Terminal box IP54, resistant to high temperature and supplied as standard
- Asynchronous three-phase motors 380-420V 50Hz according to international standards IEC 60034, IEC 60072, EMC 2014/30/UE, LVD 2014/35/UE. Motors suitable for DOL (Direct On Line) start. CE marked. Protection IP55, class F or H. Execution 4 (with impeller directly coupled to motor with feet).
CATALOGUE
-
Dynair R10 Single-phase electronic speed regulator 1 A
Construction
- Infinitely variable electronic speed controller by potentiometer
- New design with cover
- ON/OFF light switch
- Suitable for surface and built-in application
- Ease of connection by the means of removable terminals
- External trimmer for the adjustment of the fan minimum speed
- Protection fuse
- Single-phase 230V – 50/60 Hz
- Max. load 1 A
- Protection IP42
- Weight 0,5 Kg
- Dimensions 110x80x42
- CE marked
CATALOGUE
